APC Metered Rack PDU 2G 230V 16A 0U C20 Input (21) C13 (3) C19 Outlets

13.40 lbs

AP8659 Features

Metering-by-Outlet capability - Individual outlet level power metering provides a more granular view of the power distributed to equipment within the enclosure. It also provides the ability to analyze component power trends and perform capacity planning.
Remote Individual Outlet Control - Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment).
Network Management Capabilities - Full-featured network management interfaces that provide standards-based management via Web, SNMP and Telnet. Allows users to access, configure, and manage rack PDUs from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.
Alarm Thresholds - Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems.
Local Current Monitoring Display - The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip.
Power Delays - Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits and dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly.
Load indicator LED - Indicates overload and warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits.
Flash Upgradeable - Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released.
Integrates with StruxureWare Data Center Expert - An IT-ready, scalable access monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network.
Single input power source - Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections.

PDU, CAN port terminator, rack mounting brackets, serial configuration cable, documentation

72"h x 2.2"w x 2"d

Output Connections: (21) IEC 320 C13, (3) IEC 320 C19
Input Connection: IEC-320 C20

Output

Nominal Output Voltage: 100V, 200V, 208V, 230V
Maximum Total Current Draw per Phase: 16A
Overload Protection: No

Input

Nominal Input Voltage: 200V, 208V, 230V
Input Frequency: 50/60Hz
Regulatory Derated Input Current (North America): 16A
Acceptable Input Voltage: 100-240VAC
Maximum Input Current per phase: 20A

This product is subject to our return policy. Please see our complete return policy for details.

18.4 lbs

39121017