NOTE: Images may not be exact; please check specifications.
-
Temporarily Out-of-Stock
- Call for next available delivery
Transition Networks' serial RS232 to Fiber Media Converter allows you to extend the distance between serial connections with the use of fiber optic cable.
Ordering Information
$277.02
Quick View
Getting Details
- 115.0Kbps115Kbps Transfer Rate
- RS-232, Ethernet Protocol(s)
- CISPR 22 Class A, CUL, EN 60950, EN55022 Class A, EN55024, FCC Class A certified, UL Compliant
This full-featured converter transmits the full complement of RS232 flow control/handshaking signals optically and supports full or half-duplex data transmission at speeds up to 128Kb/s.
The diagnostic features included on this converter make installation easy and intuitive. A DTE/DCE switch eliminates the frustration over selecting the appropriate cable. A loop-back switch allows for complete diagnostic testing prior to system turn-up or during troubleshooting. Unit and Port LEDs allow for quick status information of the converter.
In addition to status LEDs and switch settings for local management, these converters can also be managed from remote locations when used in conjunction with a managed Point System chassis.
The diagnostic features included on this converter make installation easy and intuitive. A DTE/DCE switch eliminates the frustration over selecting the appropriate cable. A loop-back switch allows for complete diagnostic testing prior to system turn-up or during troubleshooting. Unit and Port LEDs allow for quick status information of the converter.
In addition to status LEDs and switch settings for local management, these converters can also be managed from remote locations when used in conjunction with a managed Point System chassis.
-
1.00 lbs
-
Features:
Remote management
Local or Remote loop-back on copper and fiber
DTE/DCE switch for easy installation with straight-through cabling
Full/Half-duplex transmission at speeds up to 128Kb/s
Supports the following flow control signaling:
DCD - Data Carrier Detect
RXD - Receive Data
TXD - Transmit Data
DTR - Data Terminal Ready
SG - Signal Ground
DSR - Data Set Ready
RTS - Request To Send
CTS - Clear To Send
Compliance UL Listed; C-UL Listed (Canada); CISPR22/EN55022 Class A + EN55024; EN60950 Class A; FCC Class A; CE Mark -
Connectivity Technology: WiredConnector: 9 pin D-Sub (DB-9)
-
Unit, documentation.
-
Color: BlackForm Factor: ExternalWarranty Period: Limited lifetimeWeight Taxonomy: 1.98lbs
-
Networking Type: Short-haul modem
-
Data Transfer Rate: 115Kbps
-
1.2"h x 3.3"w x 1.2"h
-
Connectors:
(1) DB-9 (male); (1) duplex fiber optic
Fiber Optic Connector Specs:
SRS2F3111-100 & SRS2F3113-100 Min TX PWR: -19.0 dBm
Max TX PWR: -14.0 dBm
RX Sensitivity: -30.0 dBm
Max In PWR: -14.0 dBm
Link Budget: 11.0 dB
SRS2F3114-100 Min TX PWR: -15.0 dBm
Max TX PWR: -8.0 dBm
RX Sensitivity: -31.0 dBm
Max In PWR: -8.0 dBm
Link Budget: 16.0 dB
SRS2F3115-100 Min TX PWR: -8.0 dBm
Max TX PWR: -2.0 dBm
RX Sensitivity: -34.0 dBm
Max In PWR: -7.0 dBm
Link Budget: 26.0 dB
-
Power Standard:
External AC/DC
12VDC
0.5 A min
Optional: SPS-1872-SA or SPS-1872-PS
External wide input DC power supply
output 12VDC, 1.0 A
Power Consumption 5.0 watts
-
Networking Protocol: EthernetNetworking Protocol: RS-232
-
This product is subject to our return policy. Please see our complete return policy for details.
-
2 lbs
-
Compliant Standards: EN 60950Compliant Standards: EN55022 Class ACompliant Standards: EN55024Compliant Standards: FCC Class A certifiedCompliant Standards: ULCompliant Standards: CISPR 22 Class ACompliant Standards: CUL
-
26121609
-
Limited Lifetime
-
Limited Lifetime
| Description | Availability | Unit Price | ||
|---|---|---|---|---|
| View All Warranties | ||||
09