HPE ProLiant ML350 Gen10 Tower Xeon 6C Bronze 3104 1.7GHz 8GB 4x3.5" NHP bays S100i 4xGbE 1x500W

66.10 lbs

System management:
iLO 5 Management (standard)
iLO Advanced (optional)
Insight Control (optional)
HPE OneView (optional)

Server, power supply, documentation

8GB (1x8GB) 2666MHz* Advanced ECC Registered (RDIMM) DDR4, expandable up to 3TB.

Each Intel Xeon family processor socket contains four memory channels per installed processor with three DIMMs per channel for a total of twelve (12) DIMMs or a grand total of twenty-four (24) DIMMs for the server. One slot contains a removable 8GB module; the others are available.

*Memory will operate at 2133MHz due to processor limitations.

Memory type:
HPE SmartMemory

Memory maximums:
With RDIMMs: 768GB (24x32GB)
With LRDIMMs: 3TB (24x128GB)

Memory population guidelines:
Do not mix RDIMMs or LRDIMMs.
Mixing memory speeds is not supported.
Install DIMMs only if the corresponding processor is installed.
If only one processor is installed in a two processor system, only half of the DIMM slots are available.
To maximize performance, it is recommended to balance the total memory capacity between all installed processors and load the channels similarly whenever possible.
When two processors are installed, balance the DIMMs across the two processors.
Quad rank RDIMMs are not supported in HPE ProLiant ML350 Gen10 servers.
Quad rank LRDIMMs are capable of up to three DIMMs per channel.
DIMMs of different speeds may be mixed in any order; the server will select a common optimal speed.
The maximum memory speed is a function of the memory type, memory configuration, and processor model.
The maximum memory capacity is a function of the memory type and number of installed processors.

Video memory:
Integrated Matrox G200eH2 graphics standard with 16MB video RAM.

There is no operating system pre-installed. Supported operating systems include:
Microsoft Windows Server
Canonical Ubuntu
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
VMware
Citrix XenServer

18.3"h x 8.6"w x 30.3"d

Expansion slots (slots full-length, full-height unless specified):
Processor 1:
Slot 1: PCIe 3.0 x16/x16, FH/FL
Slot 2: PCIe 3.0 x4/x8, FH/FL
Slot 3: PCIe 3.0 x16/x16, FH/FL
Slot 4: PCIe 3.0 x4/x8, FH/FL
Processor 2:
Slot 5: PCIe 3.0 x16/x16, FH/FL
Slot 6: PCIe 3.0 x8/x8, FH/FL
Slot 7: PCIe 3.0 x16/x16, FH/FL
Slot 8: PCIe 3.0 x8/x8, FH/FL
(1) microSD (internal)
NOTE: The microSD slot is not a hot-pluggable device. Do not attempt to plug a microSD card into the microSD slot while the server is powered.

Expansion bays:
(4) 3.5" NHP bays
(1) Optical drive bay (occupied by SAS DVD-ROM optical drive)

I/O:
(1) Serial (rear)
(1) VGA (rear)
(1) DisplayPort (rear)
(4) RJ-45 LAN
(1) iLO Remote Management Network Port (1Gb dedicated)
(5) USB 3.0 (2 front, 2 rear, 1 internal)
(1) USB 2.0 (internal
(2) Power in

Storage controller:
HPE Dynamic Smart Array S100i controller, SATA, supports RAID levels 0/1/5/10.

Network controller:
HPE Embedded 1Gb Ethernet 4-port 331i Adapter

Power:
(1) 500W flex slot platinum hot-plug low halogen power supply

Cooling:
(3) Hot plug fans, non-redundant

This product is subject to our return policy. Please see our complete return policy for details.

63.71 lbs

43211501