HPE ProLiant DL360 Gen10 1U RM Xeon 16C Gold 5218 2.3GHz 32GB 8x2.5" HP bays P408i-a 4xGbE 1x800W

28.75 lbs

System management:
HPE iLO 5

Server, easy install rail kit, 96W smart storage battery, 145mm cable, power supply, documentation

32GB (1x32GB) 2933MHz* Advanced ECC Registered (RDIMM) DDR4 SDRAM, 3TB maximum.

There are twelve 288-pin DIMM slots. One slot is occupied by a removable 32GB module; the other slots are free.

*Memory will operate at 2667MHz due to processor limitations.

Memory type:
HP SmartMemory

Memory maximums:
With RDIMMs: 768GB (24x32GB at 2400MHz)
With LRDIMMs: 3TB (24x128GB at 2400MHz)

Memory population guidelines:
Do not mix RDIMMs or LRDIMMs.
A minimum of one DIMM is required per server.
Install DIMMs only if the corresponding processor is installed.
When two processors are installed, balance the DIMMs across the two processors.
Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel. Heaviest load (DIMM with most ranks) within a channel goes furthest from the processor.
DIMMs of different speeds may be mixed in any order; the server will select a common optimal speed.
The maximum memory capacity is a function of the memory type and number of installed processors.
HP memory from previous generation servers is not compatible and will not work with the DL360 Gen10 server.

Video memory:
integrated Matrox G200eH2 memory card with 16MB shared video memory.

There is no operating system pre-installed. Supported operating systems include:
CentOS
Microsoft Windows Server 2012 R2/2016
VMware vSphere 6.0 (ESXi)/6.5
SuSE Linux Enterprise Server 11 SP4/12 SP2
Red Hat Enterprise Linux 6.9/7.3
ClearOS

1.7"h x 17.1"w x 27.8"d

Expansion slots:
(1) FlexibleLOM (full-height, 3/4-length)
(1) PCIe 3.0 x16 (full-height)
(1) PCIe 3.0 x8 (low-profile)
(1) micro SD (internal)

Expansion bays:
(8) 2.5" hot-plug bays
(1) External bay

I/O:
(1) VGA (rear; additional optional front VGA on select 8SFF and 4LFF models)
(4) RJ-45 LAN (rear)
(1) iLO RJ-45 (rear)
(1) iLO Type-A (front)
(1) Powered USB 3.0 (front)
(4) USB 3.0 (2 rear, 2 internal)
(8) SATA-600/SAS 3.0
(2) Power in

Storage controller:
HPE Smart Array P408i-a/2GB +Smart Storage Battery; 12Gb/s SAS, 6Gb/s SATA, supports RAID 0/1/5/6/10/50/60/1 ADM/10 ADM.

Network controller:
HPE Embedded 1Gb Ethernet 4-port Adapter
Features: Wake on LAN (WOL), PXE support
Remote management protocol: SNMP 3, IPMI 2.0, SMASH CLP

Power:
(1) 800W flex slot platinum hot-plug low halogen power supply
Nominal voltage: 120 to 230V AC, 50 to 60Hz

Cooling:
(5) Standard hot plug fans

This product is subject to our return policy. Please see our complete return policy for details.

41.95 lbs

43211501