NOTE: Images may not be exact; please check specifications.
-
Temporarily Out-of-Stock
- Call for next available delivery
The Cisco Timing, Communications, and Control Version Three (TCC3) card provides a next-generation system processor for the Cisco ONS 15454 Multiservice Transport Platform (MSTP) while still being usable in the Cisco ONS 15454 Multiservice Provisioning Platform (MSPP). The Cisco TCC3 card performs system initialization, provisioning, alarm reporting, maintenance, diagnostics, IP address detection and resolution, SONET and SDH data communications channel (DCC) termination, system DC input-voltage monitoring, and system fault detection. The card resides in slots 7 and 11 of the shelf assembly, providing 1:1 equipment protection.
The Cisco TCC3 card has more memory than the preceding TCC2 and TCC2P cards to accommodate extra features when used in a master Cisco ONS 15454 MSTP node. The TCC3 is only required when used as an MSTP master node when more than 12 shelves are subtended to it, and is recommended when subtending one or more Cisco ONS 15454 M6 nodes. The Cisco TCC3 can be used in all other Cisco ONS 15454 MSTP or MSPP applications but is not mandatory.
The Cisco TCC3 card incorporates a highly stable Stratum 3 internal timing reference to provide system timing based on input received from an external Building Integrated Timing Supply (BITS) source or from an incoming SONET or SDH optical signal. Synchronous status messaging helps the system to select the best timing sources, and a holdover mode maintains timing accuracy in the event that pre-provisioned synchronization references are not available.
The Cisco TCC3 card has more memory than the preceding TCC2 and TCC2P cards to accommodate extra features when used in a master Cisco ONS 15454 MSTP node. The TCC3 is only required when used as an MSTP master node when more than 12 shelves are subtended to it, and is recommended when subtending one or more Cisco ONS 15454 M6 nodes. The Cisco TCC3 can be used in all other Cisco ONS 15454 MSTP or MSPP applications but is not mandatory.
The Cisco TCC3 card incorporates a highly stable Stratum 3 internal timing reference to provide system timing based on input received from an external Building Integrated Timing Supply (BITS) source or from an incoming SONET or SDH optical signal. Synchronous status messaging helps the system to select the best timing sources, and a holdover mode maintains timing accuracy in the event that pre-provisioned synchronization references are not available.
-
2.10 lbs
-
84 section DCC (SDCC) and multiplex section DCC (MSDCC) terminations allow the interconnection of multiring and linear systems on a single shelf assembly, reducing networking costs.
84 SDCC tunnels or SDCC-to-line DCC (LDCC) tunnels provide interface flexibility for transparent transport of third-party DCC overhead channels.
Integrated system input-voltage monitoring facilitates proactive identification of DC power-system issues.
Time-and-date clock recovery after brownout or power loss prevents clock reprogramming.
Complete shelf lamp test through faceplate pushbutton simplifies LED maintenance testing.
Local and remote craft user access allows technicians to access nodes from anywhere.
Local audible alarm cutoff squelches office audible or visual alert systems.
Enhanced security capabilities through provisionable Ethernet ports allow better control over system- and network-level access. -
Card, documentation
-
Warranty Period: 5 years
-
1GB RAM
2GB Flash Memory -
12.7"h x 0.7"w x 9"d
-
(1) RJ-45 LAN
(1) DB9 RS-232 -
Networking Protocol: EthernetNetworking Protocol: SONETNetworking Protocol: TDM
-
Due to manufacturer restrictions, all sales on this item are final.
-
1 lbs
-
43222612
| Description | Availability | Unit Price | ||
|---|---|---|---|---|
| View All Warranties | ||||
12