APC Smart-UPS SRT 8KVA 8kW 6U RM 208V Hardwired Input Output (6) L6-30R Outlets Serial, (SRT8KRMXLT30)

246.00 lbs

SRT8KRMXLT30 Features

LCD graphics display - Text and mimic diagrams that display modes of operation, system parameters and alarms.
10/100 BaseT Connection - Connect the device to a network using a 10 or 100BaseT connection
Green mode - Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Battery failure notification - Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Rack/Tower convertible - Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

UPS, rack mounting brackets, rack mounting hardware, rack mounting support rails, temperature probe, USB cable, web/SNMP card, documentation

10.4"h x 17"w x 28.2"d

Output Connections: (1) Hard Wire 3-wire (2PH + G), (6) NEMA L6-30R
Input Connection: Hard Wire 3-wire (2PH + G)

Communications & Management

Interface Ports: Contact Closure, RJ-45 10/100 Base-T, RJ-45 Serial, Smart-Slot, USB
Available SmartSlot Interface Quantity: (1)
Control panel: Multi-function LCD status and control console
Audible Alarm: Audible and visible alarms prioritized by severity
Emergency Power Off (EPO): Yes

Output

Output Power Capacity: 8000 Watts / 8000 VA
Max Configurable Power: 8000 Watts / 8000 VA
Nominal Output Voltage: 208V
Output Voltage Distortion: Less than 2%
Output Frequency (sync to mains): 50/60Hz +/- 3Hz
Other Output Voltage: 240VAC
Crest Factor: 3-1
Topology: Double Conversion Online
Waveform Type: Sine wave
Bypass: Internal Bypass (Automatic and Manual)
Surge energy rating: 480 Joules

Input

Nominal Input Voltage: 208V
Input Frequency: 40-70Hz (auto sensing)
Input voltage range for main operations: 160 - 275V
Input voltage adjustable range for mains operation: 100-275V (half load)
Other Input Voltages: 240V

Batteries & Runtime

Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte, leakproof
Typical recharge time: 1.5 hours
Replacement Battery: APCRBC140 (Service center technician only)
RBC Quantity: (2)
Runtime, full load: 5.2 minutes (8000W)
Runtime, half load: 14.4 minutes (4000W)

This product has a limited return policy. For defective returns, technical issues and support please contact APC directly at 800-555-2725. Defective units should be replaced through APC directly. Visit http://www.apc.com/us/en/support/contact-us for APC warranty details and contact information.

292 lbs

39121011

3 years repair or replace (excluding battery) and 2 years for battery