APC Industrial Panel and Din Rail UPS w Standard Battery 500VA 120V (Sua500PDR-S)

28.30 lbs

Communications & Management

Interface Ports: DB-9 RS-232, SmartSlot Available
SmartSlot Interface Quantity: (1)
Control panel: LED status display with load and battery bar-graphs and On Line, On Battery, Replace Battery, Overload Indicators
Audible Alarm: Alarm when on battery, distinctive low battery alarm, overload continuous tone alarm
Emergency Power Off (EPO): Yes

Surge Protection and Filtering
Surge energy rating: 540 Joules
Filtering: Full time multi-pole noise filtering, 0.3% IEEE surge let-through, zero clamping response time, meets UL 1449

Conformance

Regulatory Approvals: UL Recognized
Environmental Compliance: RoHS 7b Exemption, REACH - Contains No SVHCs

System, software, Smart UPS signalling RS-232 cable, wall-mounting template, documentation

5.8"h x 14.25"w x 6.7"d

Output

Output Power Capacity: 325W/500VA
Nominal Output Voltage: 120V
Efficiency at Full Load: 94.0%
Output Voltage Distortion: Less than 5%
Output Frequency (sync to mains): 57-63Hz for 60Hz nominal
Topology: Line Interactive
Waveform Type: Sine wave

Input

Nominal Input Voltage: 120V
Input Frequency: 50/60Hz +/- 3Hz (auto sensing)
Input voltage range for main operations: 82-144V
Input voltage adjustable range for mains operation: 75-154V

Batteries & Runtime

Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte, leakproof
Included Battery Modules: (1)
Available Battery Slots: (1)
Typical recharge time: 2.5 hours
RBC Quantity: (1)
On battery runtime, full load: 8 minutes (325W)
On battery runtime, half load: 24.7 minutes (162W)

This product has a limited return policy. For defective returns, technical issues and support please contact APC directly at 800-555-2725. Defective units should be replaced through APC directly. Visit http://www.apc.com/us/en/support/contact-us for APC warranty details and contact information.

22 lbs

39121011