APC Back-UPS Pro 1000VA 600W 120VAC (8) 5-15R Outlets (BX1000M)

15.87 lbs

Features

Audible alarms - Provides notification of changing utility power and UPS power conditions.
Automatic self-test - Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification - Provides early-warning fault analysis on batteries enabling timely preventive maintenance.
Battery replacement without tools - Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
Boost Automatic Voltage Regulation (AVR) - Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Building Wiring Fault Indicator - This LED informs users of potentially dangerous wiring problems in the wall circuit.
Cold-start capable - Provides temporary battery power when the utility power is out.
Dataline surge protection - Provides protection of connected equipment from power surges on the data lines.
Disconnected battery notification - Warns when a battery is not available to provide backup power.
Hot-swappable batteries - Ensures clean, uninterrupted power to protected equipment while batteries are being replaced.
Intelligent battery management - Maximizes battery performance, life, and reliability through intelligent, precision charging.
LCD graphics display - Text and mimic diagrams that display modes of operation, system parameters and alarms.
Lifetime data recovery warranty - Provides peace of mind by providing professional data recovery services in the event data is lost due to the failure of the unit.
Resettable circuit breaker - Easy recovery from overloads; no need to replace a fuse.
Safety-agency approved - Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Transformer Block Spacing - Connect bulky transformer block plugs without covering up other outlets.
USB connectivity - Provides management of the UPS via a USB port.
User-replaceable batteries - Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR).

UPS, USB cable, documentation

7.5"h x 3.6"w x 12.2"d

Output Connections: (4) NEMA 5-15R (Surge Only), (4) NEMA 5-15R (Battery Backup)
Input Connections: NEMA 5-15P
Cord Length: 6ft (1.83meters)
Number of Power Cords: 1

Communications & Management

Interface Ports: USB
Control panel: Multi-function LCD status and control console
Audible Alarm: Alarm when on battery, distinctive low battery alarm, overload
continuous tone alarm

Output

Output power capacity: 600W/1000VA
Max Configurable Power: 600W/1000VA
Nominal Output Voltage: 120V
Output Frequency (sync to mains): 60Hz
Topology: Line Interactive
Waveform type: Stepped approximation to a sinewave
Maximum Output Current: 15A
Transfer Time: 8ms typical, 10ms maximum

Input

Nominal Input Voltage: 120V
Input frequency: 60Hz +/- 3Hz
Input voltage range for main operations: 88 - 139V
Maximum Input Current: 12.0A

Batteries & Runtime

Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte; leakproof
Included Battery Modules: 1
Typical recharge time: 12 hours
Expected Battery Life: 3 - 5 years
RBC Quantity: 1
Battery Volt-Amp-Hour Capacity: 140
Runtime, Full Load: 2.3 minutes (600W)
Runtime, Half Load: 10.6 minutes (300W)

Surge Protection and Filtering

Surge energy rating: 1103 Joules
Data Line Protection: Network line - 10/100/1000 Base-T Ethernet (RJ-45 connector), Coaxial cable for CATV/SATV/modem/Audio-Video (coax connector)
Filtering: Full time multi-pole noise filtering; 5% IEEE surge let-through; zero clamping response time; meets UL 1449

This product is subject to our return policy. Please see our complete return policy for details.

15.87 lbs

39121011