Eaton BladeUPS Rack Power Module 208V 12kW 8ft Input Cord (6) L14-30R Outlets

307.00 lbs

Features and Benefits

Grows with expanding IT applications using scalable architecture
Reduces operating expenses with more flexible, compact configuration options than traditional end-of-row solutions
Extends battery life and optimizes battery recharge time with ABM technology
Conserves valuable rack space with power-dense 6U form factor
Delivers the highest levels of reliability with patented Powerware Hot Sync paralleling technology
Reduces single point of failure with an intelligent bypass design to eliminate human error
Simplifies service with hot-swappable battery and electronics modules
Easily integrates connectivity products such as the Powerware Power Xpert Gateway Series 2000 card

Communications and User Interface

Software Compatibility: UPS ships with Software Suite CD containing LanSafe power management software and trial version of PowerVision
X-Slot Bays: (2) available
Control panel LCD: Two lines by 20 characters; Four menu-driven interface buttons; Four status at a glance LEDs
Multi Language Standard: English, Spanish, French, German, and Portuguese; Available: Finnish, Norwegian, Swedish, Russian, Hungarian, Polish, Romanian, Czech, Danish, Greek, Turkish, Bulgarian, Korean, and Chinese
Configuration Changes: User capable, firmware auto configures.
Online firmware updates available for operational changes
Dry Contact Inputs: (2) user configurable
Dry Contact Outputs: (1) user configurable

UPS, documentation

10.5h x 17.4"w x 26"d

General Characteristics

Power Rating: 12kW per UPS Module
Efficiency: Up to 97%
Heat Dissipation: <371W/1266 BTU/hr. at 100% rated load
Cooling: Fan cooled, temperature microprocessor monitored; front air entry, rear exhaust
Audible Noise, Normal Operation: 58dBA at 1 meter
Altitude 1000 meters (3300 ft. ASL)

Input Characteristics

Input Voltage: 208VAC and 400VAC models
Voltage Range: 208V model 180 to 255VAC; 400V model 311 to 519VAC
Frequency Range: 50 or 60Hz, +/-5Hz, auto detecting
Input Current Distortion: <5% with IT loads (PFC power supplies)
Input Power Factor: >.99 with IT loads (PFC power supplies)
Inrush Current: Load dependent
Input Requirements: Three-phase, four wire + ground
Bypass Source: Same as input, (single feed)
Generator Compatibility: Fast sync slew rate for optimum generator operation

Output Characteristics

Rated Output Voltage: Programmable 180 to 229VAC, Ph to Ph (standard); 187 to 229VAC ph to ph (ITIC optimized)
Output Configuration: Three-phase, four wire + ground
Output Frequency (nominal): 50 or 60Hz auto-detection on startup
Frequency Regulation: 0.1Hz free running
Load Power Factor Range Lagging: 0.7
Leading: 0.85

Total Output Voltage Distortion: <3% with IT loads (PFC power supplies); <5% non-linear or non-PFC power supplies

Battery Characteristics

Battery Type: VRLA - AGM
Battery Runtime (Internal): 13.6 minutes at 50% load; 4.7 minutes at 100% load
Battery String Voltage: 240VDC (Internal redundant strings in each module)
Battery Test: Autoatic battery test standard (remote scheduling capable); Manual battery test from front display
Battery Recharge Profile: ABM Technology; Advanced three-stage charging technique
Battery Cut-off Voltage: Variable from 1.67 VPC at <5 min. runtime to 1.75 VPC at >90 min. runtime
Battery Low Condition: Announced with alarm
Battery Load Share: Yes, based on battery voltage during discharge. Load shifted to systems with strongest batteries to give longest runtime for battery condition
Extended Battery Capability: Yes, add up to four additional 3U battery enclosures >34 min at 100% load,
>1 hour at 50% load)

This product is subject to our return policy. Please see our complete return policy for details.

65 lbs

39121017