Rollover to Zoom
NOTE: Images may not be exact; please check specifications.
-
Temporarily Out-of-Stock
- Call for next available delivery
The APC Symmetra PX is high-performance, 3-phase, modular, scalable, power protection solution with industry-leading efficiency, capacity and performance for medium to large data centers and mission-critical environments. Multiple UPSs can be installed in parallel for ultra-efficient system redundancy or up to 2MW of power protection. Parallel installations with custom switchgear and installations using a 3rd-party maintenance bypass panel require the APC Symmetra PX250/500 Third Party Switchgear Kit for breaker monitoring and EPO functionality.
-
6014.80 lbs
-
Conformance
Regulatory Approvals: cUL Listed, CE Mark, CSA C22.2 No.107.3-05, EN/IEC 62040-1-1, EN/IEC 62040-2, EN/IEC 62040-3, ENERGY STAR (USA), Eurobat General Purpose, OSHPD, UL 1778, UL 60950-1, UL Listed.
Included Components
UPS
(1) APC Symmetra PX 250/500kW Battery Enclosure for up to (8) Battery Modules
(5) APC Symmetra PX 25kW Power Module, 400/480V
(1) APC Symmetra PX 500kW Static Switch Module, 400/480V
Services
(1) Start-Up Service 5X8 for (1) Symmetra 250kW UPS, up to (2) XR Frames and PDU -
# Ports: 2Communication Interface: EthernetConnector: Hardwire 4-wire (3PH + G)Connector: Hardwire 5-wire (3PH + N + G)Connector: Power Hard Wire 4-wire (3PH + G)Connector: Power Hard Wire 5-wire (3PH + N + G)
-
UPS, assembly service, network management card, start-up service, documentation
-
Attributes: Double conversion onlineColor: BlackForm Factor: ExternalForm Factor: Rack-mountableManufacturer Product Line: APC Symmetra PXModel: 125kW Scalable to 500kW without Maintenance Bypass & Distribution-Parallel CapableWeight Taxonomy: 6300.75lbs
-
78.4"h x 100.4"w x 42.1"d
-
Communications & Management
Interface Port: SYPX250-500_Parallel
Available SmartSlot Interface Quantity: (3)
Pre-Installed SmartSlot Cards: AP9635CH
Control panel: Touch Screen LCD User Interface
Emergency Power Off (EPO): Optional -
Battery Run Time (max): 6minBattery Run Time (max): 6.1minBattery Technology: Lead acidPower Capacity (VA): 125000VAPower Provided: 125kWVoltage Provided: 480VVoltage Provided: AC 400/415/480V
-
General
Bypass Voltage Tolerance: +/-10% settable from +/-4/6/8 and 10% Output
Output
Power Capacity: 125kW/125kVA
Max Configurable Power: 500kW/500kVA
Nominal Output Voltage: 400V 3-PH, 480V 3-PH
Output Voltage Distortion: Less than 2%
Output Frequency (sync to mains): 50Hz, 60Hz
Other Output Voltage: 415V
Crest Factor: Unlimited
Topology: Double Conversion Online
Waveform Type: Sine wave
Output Voltage Tolerance: +/-1% static and +/- 5% at 100% load step
Output Voltage THD: < 2% linear load and <3% non-linear load
Overload Operation: 10 minutes @ 125% and 60 seconds @ 150%
Bypass: Built-in Static Bypass
Input
Nominal Input Voltage: 400V 3-PH, 480V 3-PH
Input Frequency: 40-70Hz (auto sensing)
Input voltage range for main operations: 340 - 460 (400V), 408 - 552 (480V)
Other Input Voltage: 415V
Maximum Short Circuit Withstand (Icw): 50.0kA
Input Total Harmonic Distortion: Less than 5% for full load
Type of Input Protection Required: 3-pole breaker
Batteries & Runtime
Battery Type: VRLA
Included Battery Modules: (8)
Typical recharge time: 3.5 hours
RBC Quantity: (6)
Efficiency in Battery Operation: 96%
Overload Operation: 10 minutes @ 125% and 60 seconds @ 150%
Battery Runtime, Full Load: 6.1 minutes (125kW)
Battery Runtime, Half Load: 17.3 minutes (62.3kW) -
Remote Management Protocol: HTTPRemote Management Protocol: SNMP
-
This product has a limited return policy. For defective returns, technical issues and support please contact APC directly at 800-555-2725. Defective units should be replaced through APC directly. Visit http://www.apc.com/us/en/support/contact-us for APC warranty details and contact information.
-
7161 lbs
-
Compliant Standards: CSA C22.2 No. 107.3Compliant Standards: CULCompliant Standards: EN 62040-2Compliant Standards: Energy StarCompliant Standards: IEC 60529 IP20Compliant Standards: IEC 62040-1-1Compliant Standards: IEC 62040-2Compliant Standards: IEC 62040-3Compliant Standards: NEMA TP-1Compliant Standards: ULCompliant Standards: UL 1778Compliant Standards: UL 60950-1
-
39121011
-
Warranty Period: 1-year warranty
| Description | Availability | Unit Price | ||
|---|---|---|---|---|
| View All Warranties | ||||
11