APC Symmetra PX 10KVA 10kW Scalable to 100kW N+1, 208V w Startup (SY10K100F)

1711.20 lbs

SY10K100F Features

Swappable batteries - Allows quick addition of runtime capacity or replacement of existing battery modules. Installed modules are automatically recognized by the system.
Battery replacement without tools - Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
Advanced electrical features - Excellent power conditioning, very low harmonic distortion through IGBT rectifier, input power factor correction and high power efficiency.
Adjustable voltage sensitivity - Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Adjustable voltage-transfer points - Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Automatic self-test - Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery modules connected in parallel - Delivers higher availability through redundant batteries.
Manageable external batteries - Reduces preventative maintenance service needs by monitoring the health and status of the external batteries and their expected runtime.
Battery failure notification - Provides early-warning fault analysis on batteries enabling timely preventive maintenance.
Temperature-compensated battery charging - Prolongs battery life by regulating the charge voltage according to battery temperature.
Intelligent battery management - Maximizes battery performance, life, and reliability through intelligent, precision charging.

UPS, Web/SNMP management card, start-up service, documentation

79.2"h x 47.25"w x 42.1"d

Output Connection: (1) Hard Wire 5-wire (3PH + N + G)

Output

Output Power Capacity: 10kW/10kVA
Max Configurable Power: 100kW/100kVA
Nominal Output Voltage: 120V, 208V, 208V 3-ph
Output Voltage Distortion: Less than 2%
Output Frequency (sync to mains): 57 - 63Hz for 60Hz nominal
Topology: Double Conversion Online
Waveform Type: Sine wave
Output Voltage Tolerance: +/-1% static and +/- 5% at 100% load step
Output Voltage THD: < 2% for 0 to 100% linear load and < 6% for full non-linear load
Bypass: Built-in Static Bypass

Input

Nominal Input Voltage: 208V, 3-ph
Input Frequency: 40-70Hz
Input voltage range for main operations: 177 - 239V (208V)
Maximum Input Current: 332A
Input Total Harmonic Distortion: Less than 5% for full load

Batteries & Runtime

Battery Type: VRLA
Battery Design Life: 5 - 8 Years
Battery Service Life: 3 - 5 Years
Included Battery Modules: (1)
Battery Slots Empty: (8)
Typical recharge time: 2 hours
Nominal Battery Voltage: +/-192V (split battery referenced to neutral)
End of Discharge Battery Voltage: +/-154V
Maximum Available Short Circuit Current: 30kA
Efficiency in Battery Operation: 94.70%
End of Discharge Maximum Battery Current: 351
Run time, full load: 6.4 minutes (10kW)
Run time, half load: 17.8 minutes (5kW)

This product is subject to our return policy. Please see our complete return policy for details.

1884.8 lbs

39121011