HPE FIO 1910-8-POE+ Switch

4.60 lbs

Simple Web management: allows for easy management of the switch- even by nontechnical users- through an intuitive Web GUI; http and secure http (https) is supported. Single IP management: enables management of up to four HP 1910 devices using a single Web interface; simplifies management of multiple devices. Secure Web GUI: provides a secure, easy-to-use graphical interface for configuring the module via HTTPS. SNMPv1, v2c, and v3: facilitates management of the switch, as the device can be discovered and monitored from an SNMP management station. Complete session logging: provides detailed information for problem identification and resolution.

Broadcast control: allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic. Rate limiting: sets per-port ingress enforced maximums and per-port, per-queue minimums. Traffic prioritization: provides time-sensitive packets (like VoIP and video) with priority over other traffic based on DSCP or IEEE 802.1p classification; packets are mapped to four hardware queues for more effective throughput.

IPv6: IPv6 host: enables switches to be managed and deployed at the IPv6 network's edge. IPv6 routing: supports IPv6 static routes. MLD snooping: forwards IPv6 multicast traffic to the appropriate interface, preventing traffic flooding. IPv6 ACL/QoS: supports ACL and QoS for IPv6 network traffic. Auto-MDI/MDIX: adjusts automatically for straight-through or crossover cables on all 10/100/1000 ports. IEEE 802.3X flow control: provides a flow throttling mechanism propagated through the network to prevent packet loss at a congested node. IEEE 802.3af Power over Ethernet (PoE) ready: provides up to 15.4 W per port to power standards-compliant IP phones, wireless LAN access points, Web cameras, and more (all PoE models). IEEE 802.3at Power over Ethernet (PoE+): provides up to 30 W per port which allows support of the latest PoE+-capable devices such as IP phones, wireless access points, and security cameras, as well as any IEEE 802.3af-compliant end device; eliminates the cost of additional electrical cabling and circuits that would otherwise be necessary in IP phone and WLAN deployments. (Note: applies to all PoE models, except the two 24G-PoE models which support a pre-standard implementation of PoE+).

Advanced access control lists (ACLs): enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access. Secure Sockets Layer (SSL): encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch. IEEE 802.1X and RADIUS network logins: controls port-based access for authentication and accountability. Automatic VLAN assignment: assigns users automatically to the appropriate VLAN based on their identity, location and time of day. STP BPDU port protection: blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks.

Half-/full-duplex auto-negotiating capability on every port: doubles the throughput of every port. Selectable queue configurations: allows for increased performance by selecting the number of queues and associated memory buffering that best meet the requirements of the network applications. IGMP snooping: improves network performance through multicast filtering, instead of flooding traffic to all ports. Fiber uplink: provides greater distance connectivity using Gigabit fiber uplinks.

VLAN support and tagging: supports IEEE 802.1Q (4,094 VLAN IDs) and 256 VLANs simultaneously. Spanning Tree Protocol (STP): supports standard IEEE 802.1D STP, IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) for faster convergence, and IEEE 802.1s Multiple Spanning Tree Protocol (MSTP). BPDU filtering: drops BPDU packets when STP is enabled globally but disabled on a specific port. Jumbo frame support: supports up to 10 kilobyte frame size to improve the per

switch, documentation

1.7"h x 13"w x 9.1"d

(8) 100Base-TX - RJ-45 - PoE
(2) 1000Base-T - RJ-45
(2) SFP

Supply: 100-240VAC, 50/60Hz
Consumption: 90W (max)

This product is subject to our return policy. Please see our complete return policy for details.

6 lbs

43222612

Lifetime

Lifetime