- Transition Networks
- Call for next available delivery
- Ethernet 1000Base-T, Ethernet 100Base-TX, Ethernet 10Base-T Ethernet 1000Base-BX-D Cabling
- Supports IEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3, IEEE 802.3ah Networking
- Data Transfer Speeds up to 1Gbps
The ION 3220 Series of Network Interface Devices (NIDs) are a remotely managed product that offers IP or IP-Less management methods for secure delivery of Ethernet services for business and mobile backhaul applications. With MEF 9, 14 & 21 certification the ION 3220 Series ensures you are compliant with the latest standards. The ION 3220 Series is a 10/100/1000Mbps product with advance features including – IEEE 802.3ah Link OAM, VLAN, QoS, SSH/SSL, jumbo frame support and bandwidth allocation.
802.3ah Link OAM
10K Jumbo Frame Support
Two selectable Remote Management modes:
IP-Based Remote Management
In-Band Link OAM 802.3ah (remote device managed by local peer)
Automatically detects and configures the twisted pair port on the converter to the correct MDI or MDI-X configuration.
Allows devices to perform automatic configuration to achieve the best possible mode of operation over a link.
Pause (IEEE 802.3xy):
Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed.
Transparent Link Pass Through:
Transparent Link Pass Through sends a link-loss signal over the fiber, instructing the remote converter to shut down the copper port—thus notifying the end device—while maintaining the fiber link between the two converters.
Far End Fault (FEF):
A troubleshooting feature that is generally used in conjunction with Link Pass Through to notify both end devices of a loss of link.
This feature puts a converter in a special mode that enables the device to loop back the signal from the RX port to the TX port on either media for testing and troubleshooting purposes.
Remote Firmware Upgrade
IEEE 802.1p QoS packet classification
Ipv4 IP TOS, DiffDerv and IPv6 traffic class QoS classification
IEEE 802.1q VLAN and double VLAN tagging with 4096 VIDs
RMON counters for each port
DMI Optical Management
Cable diagnostic function for TP ports
Command Line Interface (CLI)
Focal Point Management
SNMP v1, v2c & v3
USB port for basic setup
Cabling Type: Ethernet 1000Base-BX-D, Ethernet 1000Base-T, Ethernet 100Base-TX, Ethernet 10Base-T
Data Transfer Rate: 1 Gbps
3.4"h x 8.6"w x 6.5"d
(1) 10/100/1000BASE-T (RJ-45)
(1) SFP Port
(1) USB Type B
Consumption: 4.5W (typ.)
Networking Protocol: IEEE 802.1p, IEEE 802.1Q, IEEE 802.1x, IEEE 802.3, IEEE 802.3ahRemote Management Protocol: RMON, SNMP 1, SNMP 2c
This product is subject to our return policy. Please see our complete complete return policy for details.
Compliant Standards: CE