- Hewlett Packard Enterprise
- Call for next available delivery
- Intel 1.7GHz Xeon Bronze 3106
- 1 processor(s) installed
- 2 processor(s) supported
- 16GB installed RAM
- Technology is DDR4 SDRAM
- 768GB maximum
- 11MB installed cache
- 0GB Hot-plug, Removable hard drive
- No Operating System Installed
- 2U Rackmount
- Supports Gigabit Ethernet Networking
The HP ProLiant DL380 Gen10 Server delivers the best performance and expandability in the HP 2P rack portfolio. Reliability, serviceability, and near continuous availability, backed by a comprehensive warranty, make it ideal for any environment.
HPE iLO Standard with Intelligent Provisioning (embedded)
HPE OneView Standard (requires download)
HPE iLO Advanced
HPE iLO Advanced Premium Security Edition
Insight Control and HPE OneView Advanced (require licenses)
Server, DL38x Gen10 M.2 1-Port 3 x PCIe x8 Primary Riser Kit FIO, 2U LFF Easy Install Rail Kit, power supply, documentation
Chassis Form Factor: 2U RackmountColor: Black, Silver
Cache Memory (installed): 11 MBRAM (installed): 16 GBRAM (max): 768 GBRAM Technology: DDR4 SDRAM
16GB (1x16GB) 2666MHz* Registered DDR4 SDRAM, expandable up to 3TB.
There are 24 DIMM slots in total, with 12 slots per processor. One slot contains a removable 16GB module; the others are available.
*Memory will operate at 2133MHz due to processor limitations.
Memory Subsystem Architecture:
Each Intel Xeon family processor socket contains four memory channels per installed processor with three DIMMs per channel for a total of twelve (12) DIMMs or a grand total of twenty-four (24) DIMMs for the server.
With LRDIMMs: 3TB (24x128GB LRDIMM)
With RDIMMs: 768GB (24x32GB RDIMM)
Advanced ECC uses single device data correction to detect and correct single andall multibit error that occurs within a single DRAM chip.
Memory online spare mode detects a rank that is degrading and switches operation to the spare rank.
Memory Population Rules and Guidelines:
Do not mix RDIMMs or LRDIMMs.
A minimum of one DIMM is required per server.
Install DIMMs only if the corresponding processor is installed.
If only one processor is installed in a two processor system, only half of the DIMM slots are available.
To maximize performance, it is recommended to balance the total memory capacity between all installed processors and to load the channels similarly whenever possible.
When two processors are installed, balance the DIMMs across the two processors.
LRDIMMs are supported up to 3 DIMMs per channel.
DIMMs of different speeds may be mixed in any order; the server will select a common optimal speed.
The maximum memory speed is a function of the memory type, memory configuration, and processor model.
The maximum memory capacity is a function of the memory type and number of installed processors.
HP memory from previous generation servers is not compatible with the DL380 Gen10 Server. Certain HP SmartMemory features such as memory authentication and enhanced performance may not be supported.
Integrated Matrox G200eH2 video standard with 16MB of VRAM.
There is no operating system pre-installed. Supported operating systems include:
Microsoft Windows Server 2016/2012 RS
Red Hat Enterprise Linux (RHEL) 7.3/6.9
SUSE Linux Enterprise Server (SLES) 12SP2/11SP4
VMware ESXi 6.5 and U1 (upon release)/6.0 U3
OS Provided: No Operating System Installed
CD/DVD Type: No Optical Drive
3.4"h x 17.5"w x 28.8"d
Slot 1: PCIe 3.0 x8, x8 (full-height, half-length, processor 1)
Slot 2: PCIe 3.0 x16, x16 (full-height, full-length, processor 1)
Slot 3: PCIe 3.0 x8, x8 (full-height, half-length, processor 1)
Slot 4: PCIe 3.0 x8, x8 (full-height, half-length, processor 2)
Slot 5: PCIe 3.0 x16, x16 (full-height, full-length, processor 2)
Slot 6: PCIe 3.0 x8, x8 (full-height, half-length, processor 2)
(1) Micro SD (internal)
NOTE: The Micro SD slot is not a hot-pluggable device. Do not attempt to plug an SD card into the SD slot while the server is powered.
(8) 3.5" LFF hot-plug bays
(1) Universal Media Bay (for optional optical drive)
(1) VGA (standard on rear; one additional on front via optional Universal Media Bay, not active simultaneously)
(5) USB 3.0 (1 front, 2 rear, 2 internal secure)*
(1) DisplayPort (front; optional via Universal Media Bay; standard on 8xLFF bay chassis)
(1) GbE dedicated iLO remote management
(1) iLO service (front; not available on 12xLFF chassis or when SID is ordered)
(2) Power in
* Two additional front USB 2.0 ports available via optional Universal Media Bay or standard on 8xLFF bay chassis
HPE Dynamic Smart Array S100i, SATA only, supports RAID 0/1/5/10.
HPE Embedded, 4x1Gb
# Power Supplies Installed: 1# Power Supplies Supported: 2Power Provided: 500.00 watt(s)
(1) 500W Flex slot hot-plug low halogen platinum power supply, 2 maximum.
(4) standard fans
# Processors Installed: 1# Processors Supported: 2Chipset Type: Intel C621Data Bus Speed: 2133 MHzNumber of Cores: 8-coreProcessor Manufacturer: IntelProcessor Model Number: 3106Processor Speed: 1.7 GHzProcessor Type: Xeon BronzeProcessor Upgradability: Upgradable
Networking Protocol: Gigabit Ethernet
Hard Drive Capacity: 0 GBHard Drive Type: Hot-plug, RemovableStorage Controller RAID Level: RAID 0, RAID 1, RAID 10, RAID 5Storage Controller Type: SATA
Video Card: Matrox G200eH2Video RAM (installed): 16 MBVideo Slot Type: PCI Express 3.0 x16
Limited onsite NBD coverage
Batch Add Products by Item #