- Hewlett Packard Enterprise
- Ships in 24 Hours
- 24 IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3at, PoE+, Gigabit Ethernet Ports
- Remote Management over CLI, HTTP, RMON 1, RMON 2, RMON 3, RMON 9, SNMP 1 SNMP 2c, SNMP 3, Telnet, SSH-2
- Warranty: Limited Lifetime
The HP 2530-24G-PoE+ Switch features Traffic prioritization (IEEE 802.1p), allowing for real-time traffic classification with support for eight priority levels mapped to either two or four queues.
Simplified QoS configuration: Port-based: prioritize traffic by specifying a port and priority level. VLAN-based: prioritize traffic by specifying a VLAN and priority level.
Class of Service (CoS): sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ.
Rate limiting: sets per-port ingress enforced maximums for all ingressed traffic, or for broadcast, multicast or unknown destination traffic.
Choice of management interfaces: Web graphical user interface (GUI): HTML-based easy-to-use graphical interface allows configuration of the switch from any Web browser. Command-line (CLI): robust command-line interface provides advanced configuration and diagnostics. Simple Network Management Protocol (SNMPv1/v2c/v3): allows switch to be managed with a variety of third-party network management applications.
Virtual stacking: single IP address management up to 16 switches.
sFlow (RFC 3176): wire-speed traffic accounting and monitoring configured by SNMP and CLI with three terminal encrypted receivers.
IEEE 802.1AB Link Layer Discovery Protocol (LLDP): automates device discovery protocol for easy mapping by network management applications.
IPv6: IPv6 host: allows the switch to be deployed and managed at the edge of an IPv6 network. Dual stack (IPv4/IPv6): supports connectivity for both protocols; provides a transition mechanism from IPv4 to IPv6. MLD snooping: forwards IPv6 multicast traffic to the appropriate interface; prevents IPv6 multicast traffic from flooding the network.
IEEE 802.3af Power over Ethernet (PoE): provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and security cameras.
IEEE 802.3at Power over Ethernet Plus: provides up to 30 W per port to IEEE 802.3 for PoE/PoE+ powered devices such as video IP phones, IEEE 802.11n wireless access points and advanced pan/tilt/zoom security cameras (see product specifications for total PoE power available).
Auto-MDIX: adjusts automatically for straight-through or crossover cables on all ports.
# Ports: 24
100 Mb Latency: < 7.4 µs
1000 Mb Latency: < 2.3 µs
Throughput: up to 41.6 Mpps
Switching capacity: 56 Gbps
PoE capability: 195 W
RAM (installed): 256 MB
256MB DDR3 DIMM
128 MB flash
1.8"h x 17.4"w x 13"d
(24) RJ-45 autosensing 10/100/1000 PoE+
(4) fixed Gigabit Ethernet SFP ports
(1) serial console port
Internal power supply
Voltage Required: AC 120/230 V (50/60 Hz)
Networking Protocol: Gigabit Ethernet, IEEE 802.3, IEEE 802.3ab, IEEE 802.3at, IEEE 802.3u, PoE+Remote Management Protocol: CLI, HTTP, RMON 1, RMON 2, RMON 3, RMON 9, SNMP 1, SNMP 2c, SNMP 3, SSH-2, Telnet
Compliant Standards: IPv6 Ready