- Hewlett Packard Enterprise
- Ships Monday
- 24 PoE+, Fast Ethernet, RADIUS, TACACS+ Ports
- Remote Management over CLI, HTTP, RMON 1, RMON 2, RMON 3, RMON 9, SNMP 1, SNMP 2c, SNMP 3, Telnet SSH-2
- Warranty: Limited Lifetime
The HP 2530 Switch Series consists of four fully managed Layer 2 edge switches, delivering cost-effective, reliable and secure connectivity for business networks.
Quality of Service (QoS):
Traffic prioritization (IEEE 802.1p): allows real-time traffic classification with support for eight priority levels mapped to either two or four queues; uses weighted deficit round robin (WDRR) or strict priority (SP).
Simplified QoS configuration: Port-based: prioritizes traffic by specifying a port and priority level. VLAN-based: prioritizes traffic by specifying a VLAN and priority level.
Class of Service (CoS): sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ.
Rate limiting: sets per-port ingress enforced maximums for all ingressed traffic or for broadcast, multicast, or unknown destination traffic.
Layer 4 prioritization: enables prioritization based on TCP/UDP port numbers.
Choice of management interfaces: Web graphical user interface (GUI): HTML-based easy-to-use graphical interface allows configuration of the switch from any Web browser. Command-line interface (CLI): provides advanced configuration and diagnostics through a robust CLI. Simple Network Management Protocol (SNMPv1/v2c/v3): allows a switch to be managed with a variety of third-party network management applications.
Virtual stacking: provides single IP address management of up to 16 switches.
sFlow (RFC 3176): delivers wire-speed traffic accounting and monitoring configured by SNMP and CLI with three terminal encrypted receivers.
IEEE 802.1AB Link Layer Discovery Protocol (LLDP): automates device discovery protocol for easy mapping by network management applications.
Logging: provides local and remote logging of events via SNMP (v2c and v3) and syslog; provides log throttling and log filtering to reduce the number of log events generated.
IPv6: IPv6 host: allows the switch to be deployed and managed at the edge of an IPv6 network. Dual stack (IPv4/IPv6): supports connectivity for both protocols; provides a transition mechanism from IPv4 to IPv6. MLD snooping: forwards IPv6 multicast traffic to the appropriate interface; prevents IPv6 multicast traffic from flooding the network.
IEEE 802.3af Power over Ethernet (PoE): provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and security cameras.
IEEE 802.3at Power over Ethernet Plus: provides up to 30 W per port to IEEE 802.3 for PoE/PoE+ powered devices such as video IP phones, IEEE 802.11n wireless access points, and advanced pan/tilt/zoom security cameras (see product specifications for total PoE power available).
Auto-MDIX: adjusts automatically for straight-through or crossover cables on all ports.
Layer 2 switching:
VLANs: provides support for 512 VLANs and 4,094 VLAN IDs.
Jumbo packet support: supports up to 9220-byte frame size to improve the performance of large data transfers. The 8 and 24 port Fast Ethernet models automatically support up to 2000-byte frames with no configuration needed.
16K MAC address table: provides access to many Layer 2 devices.
GARP VLAN Registration Protocol: allows automatic learning and dynamic assignment of VLANs.
# Ports: 24
RAM (installed): 256.000 MB
128 MB flash
256 MB DDR3 SDRAM
1.8"h x 17.4"w x 12.7"d
(24) 100Base-TX 10Base-T/100Base-TX RJ-45 PoE+
(2) 1000Base-T 10Base-T/100Base-TX/1000Base-T RJ-45
(2) SFP (mini-GBIC)
(1) console RJ-45 management
(1) USB Type B management
Consumption: 237W (max); 21.8W (standby)
Networking Protocol: Fast Ethernet, PoE+, RADIUS, TACACS+Remote Management Protocol: CLI, HTTP, RMON 1, RMON 2, RMON 3, RMON 9, SNMP 1, SNMP 2c, SNMP 3, SSH-2, Telnet
This product is subject to our return policy. Please see our complete return policy for details.