- Ships Monday
- Provides 2880VA 2700watt(s), 120V power
- Surge Suppression is Standard
- Connector(s): Power NEMA 5-15 (F), Power NEMA 5-20 (F), Power NEMA L5-30 (F), Power NEMA L5-30 (M)
- 10 Outlets
- 6.3 minute(s) Battery Runtime at Full Load
- Attributes include Line interactive
The APC by Schneider Electric Smart-UPS X 3000VA Rack/Tower LCD UPS is a high performance uninterruptible power supply. It provides protection for electronic equipment from AC power blackouts, brownouts, sags and surges, small AC fluctuations and large disturbances. The UPS also provides battery backup power for connected equipment until AC power returns to safe levels or the batteries are fully discharged.
Intuitive LCD interface - Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
High frequency design - Reduces or eliminates bulky transformers resulting in lighter units for ease of handling.
Auto recognition of external batteries - UPS recognizes when external battery packs are attached and automatically adjusts runtime.
Predictive replace battery date - Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
Green mode - Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Energy meter - Provides actual kilowatt hours of usage for energy conscious users.
Outlet group control - Turn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).
Load shedding - Turn off select outlet groups in a pre-determined sequence to shed less critical equipment and conserve runtime (UPSs with switched outlet groups).
Pure sine wave output on battery - Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
Multiple switched outlet groups - Multiple outlet groups that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
Preinstalled network management card - Provides for remote management and control of the UPS over a network out of the box.
StruxureWare Central compatible - Enables centralized management via StruxureWare Central.
Battery failure notification - Provides early-warning fault analysis on batteries enabling timely preventive maintenance.
High online efficiency - Reduces utlility costs, generates less heat.
Cold-start capable - Provides temporary battery power when the utility power is out.
Hot-swappable batteries - Ensures clean, uninterrupted power to protected equipment while batteries are being replaced.
Disconnected battery notification - Warns when a battery is not available to provide backup power.
Automatic self-test - Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Automatic restart of loads after UPS shutdown - Automatically starts up the connected equipment upon the return of utility power.
Adjustable voltage-transfer points - Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Adjustable voltage sensitivity - Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Audible alarms - Provides notification of changing utility power and UPS power conditions.
User-replaceable batteries - Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR).
USB connectivity - Provides management of the UPS via a USB port (not available on all models).
Serial Connectivity - Provides management of the UPS via a serial port.
Temperature-compensated battery charging - Prolongs battery life by regulating the charge voltage according to battery temperature.
Boost and Trim Automatic Voltage Regulation (AVR) - Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
Scalable runtime - Allows additional run time to be quickly added as needed.
Safety-agency approved - Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Rack/Tower convertible - Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Multiple mounting methods - Allows for standardization on one product for use in different environments.
Network manageable - Provides remote power management of the UPS over the network.
Sequenced network shutdown and reboot - Customize network shutdown and reboot sequence of connected servers and UPSs.
Communications & Management
Interface Ports: SmartSlot
Pre-Installed SmartSlot Card: AP9631
Control panel: LED status display with On Line, On Battery, Replace Battery and Overload indicators, Multi-function LCD status and control console
Audible Alarm: Alarm when on battery, distinctive low battery alarm, configurable delays
Emergency Power Off (EPO): Yes
Regulatory Approvals: BSMI, CSA, EN 50091-2, EN 55022 Class A, FCC Part 15 Class A, NOM, TUV, UL 1778, VCCI Class A
Standard Warranty: 3 years repair or replace (excluding battery) and 2 year for battery, optional on-site warranties available, optional extended warranties available
Equipment protection policy: Lifetime $150,000
Sustainable Offer Status
REACH: Contains No SVHCs
# Ports: 10Communication Interface: Ethernet, Serial (RS-232), USBConnector: Power NEMA 5-15 (F), Power NEMA 5-20 (F), Power NEMA L5-30 (F), Power NEMA L5-30 (M)
UPS, software CD, rack mounting hardware, rack mounting support rails, support feet, Smart UPS signalling RS-232 cable, USB cable, Web/SNMP card, documentation
Attributes: Line interactiveColor: BlackForm Factor: 4U Rackmount
7"h x 17"w x 19"d
(6) NEMA 5-15R (Battery Backup)
(1) NEMA L5-30R (Battery Backup)
(3) NEMA 5-20R (Battery Backup)
Input Connection: NEMA L5-30P
Cord Length: 8 feet (2.44 meters)
Battery Run Time (max): 6.3 minute(s)Power Provided: 120 V, 2700 watt(s), 2880 VASurge Suppression: Standard
Output Power Capacity: 2700 Watts/2880VA
Nominal Output Voltage: 120V
Output Voltage Distortion: Less than 5%
Output Frequency (sync to mains): 50/60Hz +/- 3Hz
Topology: Line Interactive
Waveform Type: Sine wave
Nominal Input Voltage: 120V
Input Frequency: 50/60Hz +/- 3Hz (auto sensing)
Input voltage range for main operations: 70 - 153V
Transfer Time: 2-4ms
Batteries & Runtime
Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte; leakproof
Typical recharge time: 3 hours
Replacement Battery: APCRBC143
RBC Quantity: (1)
Battery runtime, Full Load; 6.3 minutes (2700W)
Battery runtime, Half Load; 18 minutes (1350W)
Surge Protection and Filtering
Surge energy rating: 540 Joules
Filtering: Full time multi-pole noise filtering, 0.3% IEEE surge let-through, zero clamping response time, meets UL 1449
This product is subject to our return policy. Please see our complete complete return policy for details.
Compliant Standards: BSMI, CSA, EN 50091-2, EN 55022 Class A, Energy Star, FCC Part 15 A, NOM, TUV, VCCI Class A
2 year warranty on battery
Equipment protection policy Lifetime: $150,000